Foundation crack and settlement repair

Cracks, settlement, and leaks repaired on Cape Cod

Moriah Masonry & Landscaping repairs foundation cracks, settlement, and water leaks in South Yarmouth, MA, sealing active leaks and arresting movement in poured concrete, block, brick, and stone walls.

This work covers the cracks that let water in and the movement that keeps them growing. A hairline crack is a thin surface split. A structural crack runs deeper and often moves with the seasons.

You need it when a basement wall weeps after rain, when a crack widens year over year, or when a floor or wall shows uneven settlement. Left alone, water and movement both get worse.

Here on the Cape, the freeze-thaw cycle drives a lot of this. Water gets into a crack, freezes, expands, and splits it wider every winter. South Yarmouth sits right on Bass River near Nantucket Sound, so that wet-then-frozen cycle runs hard.

This page covers what crack and settlement repair includes, what it costs, how we do it, and how long it takes.

Rated 4.8 stars across 24 Google reviews. Every project starts with a free on-site estimate.

A brick wall part way through repointing, with fresh mortar joints beside weathered ones
Foundation crack injection and stabilization, done right for Cape Cod conditions.

Google Rating

4.8-Star Google Rating

Customer feedback on Google

Local Experience

Since 2020 Serving South Yarmouth

Crack injection and foundation repair across Cape Cod

Project Estimates

Free Estimates Available

On-site assessment before any work begins

The full project scope

What crack and settlement repair covers, and what it does not

Every crack and settlement repair we do in South Yarmouth starts with a diagnostic assessment, crack cleaning and prep, injection materials and labor, port removal and surface finishing, basic drainage recommendations, and full site cleanup.

Brick joints raked out to depth and cleaned, ready for fresh mortar
The work that stops water from coming back. Crack injection, drainage prep, and stabilization are what keep a repaired foundation dry through Cape Cod winters.

What comes with every repair

We start on site, reading the crack width, length, and moisture source before anything else. Every repair includes cleaning the crack down to sound material, setting injection ports every 8 to 12 inches, and pressure-feeding epoxy or polyurethane resin until it bleeds through the full depth of the wall.

After cure, we confirm with a moisture meter and a visual check that no active water is still moving through. Basic drainage recommendations are included on every job because sealing the crack without addressing the water source just moves the problem.

The details that make it hold

Port removal and surface finishing are part of the scope. When a wall is bowing or still settling, carbon fiber straps or wall anchors are installed at manufacturer spacing to arrest movement before injection.

The prep and the drainage recommendations are the parts most contractors skip, but they are what determine whether the repair holds through the next freeze cycle or opens back up by spring.

What's included and what isn't

Some work is part of every repair. Other items depend on crack type, foundation material, wall condition, and whether the building department requires a permit or an engineer's review.

Included
Diagnostic assessment
Crack cleaning and prep
Injection ports and materials
Epoxy or polyurethane injection labor
Port removal and surface finishing
Basic drainage recommendations
Moisture meter and visual check
Site cleanup
Typically not included
Structural engineer's stamped letter
Permit fees
Excavation for exterior access
Interior or exterior drainage system
Cosmetic wall refinishing or paint
Mold remediation
Decorative parging or veneer
Landscaping after excavation
What makes the repair hold

A correctly repaired crack is filled front to back, not just skinned over on the inside.

Injection ports are pressure-fed until resin bleeds through the full depth of the wall. Epoxy bonds a static, non-leaking structural crack back to near-original strength. Polyurethane foam expands on contact with moisture and stops an active leak. After cure, a moisture meter confirms no water is still moving through. For structural repairs, the work is reviewed against local building code and, where the building department requires it, by a licensed structural engineer.

On-site estimates

How much does foundation crack repair cost on Cape Cod?

Foundation crack repair in South Yarmouth typically runs $650 to $1,300 per crack for standard epoxy or polyurethane injection in 2026. Structural reinforcement, carbon fiber, wall anchors, or underpinning, runs $3,000 to $20,000 or more. Every project is quoted after an on-site assessment because the real cost depends on the crack, the wall material, and what we find on site.

A stepped crack running through the mortar joints of a block foundation wall
Why we price on site

The crack you see is not the whole job.

Cost tracks whether the crack is actively leaking or dry, the foundation material, how accessible the wall is, and how many cracks need repair. We come out, walk the basement or crawlspace, and price the actual project.

Two cracks with the same length can carry very different costs once wall depth, settlement severity, equipment access, and drainage requirements are taken into account. A flat number given over the phone would leave too much out.

Typical installed range in South Yarmouth, 2026

$650 to $1,300 per crack for epoxy or polyurethane injection

Whether the crack is leaking vs. dry, the foundation material, site access, number of cracks, and severity of settlement are what move a project inside that range. Structural reinforcement and underpinning start at $3,000 and can exceed $20,000 depending on scope. These figures are a starting point for planning, not a quote. The number on your estimate comes from the site visit.

What moves the price

These are the main site and construction factors we evaluate when preparing your estimate.

01 Leaking vs. dry

An active leak requires polyurethane foam and additional prep compared to a dry, static crack sealed with epoxy.

02 Foundation material

Poured concrete injects cleanly. Block, brick, and stone foundations take more time and material to fill correctly.

03 Site access

A finished basement, tight crawlspace, or exterior excavation all add labor and affect the scope of work.

04 Number of cracks

Multi-crack jobs typically carry a lower per-crack cost than a single isolated repair.

05 Settlement severity

A cosmetic crack is a seal job. Active structural movement requires stabilization and often an engineer's review.

06 Permits and engineering

Carbon fiber, wall anchors, and underpinning often require a building permit and a licensed structural engineer's review, which are priced separately.

Free on-site estimate Show us the wall. We'll price the real repair.
Get a free estimate
Choose the right repair

What types of crack and settlement repair are available in South Yarmouth?

We handle four repair systems for South Yarmouth foundations and masonry walls. The right choice depends on whether the crack is leaking, whether the wall is moving, the foundation material, and how far the settlement has gone.

A brick wall part way through repointing, with fresh mortar joints beside weathered ones 01
Dry, cosmetic cracks

Hairline surface seal

A hairline crack is a thin, non-moving split, usually from concrete shrinkage. We clean it and seal the surface with a hydraulic cement or masonry sealer. Best for dry cracks that are not leaking. On the Cape, sealing early keeps freeze-thaw from prying it open.

A stepped crack running through the mortar joints of a block foundation wall 02
Leaking or load-bearing cracks

Structural crack injection

For deeper cracks, we inject resin under pressure. Epoxy bonds static, non-leaking structural cracks back to full strength. Polyurethane foam goes into active leaks because it expands on contact with moisture and flexes to stop water infiltration. Best for cracks that leak or carry load.

A chimney crown with cracking and spalling at the top courses 03
Bowing walls under pressure

Carbon fiber or wall anchor stabilization

When a wall bows from hydrostatic pressure, water in the soil pushing inward, we add carbon fiber straps or staples, or steel wall anchors. These arrest the movement so the crack stops reopening. Best for walls that are leaning, not just cracked.

Brick faces spalled and flaking where water froze inside the masonry 04
Active settlement, dropped footing

Underpinning or pier work

For real settlement, where a footing has dropped, we stabilize from below with underpinning or push piers. This is the heaviest fix and the longest. Best for differential settlement that is still moving. Sandy Cape soil makes a sound footing the whole game here.

Compare your options

Each repair system addresses a different problem. The crack type, moisture status, and degree of movement determine which option is right for your wall.

Hairline surface seal

Best for Dry cosmetic cracks
Cape conditions Good if caught before freeze-thaw widens it
Typical range $650-$1,300 per crack

Structural injection

Best for Leaking or load-bearing cracks
Cape conditions Strong; polyurethane flexes with movement
Typical range $650-$1,300 per crack

Carbon fiber / wall anchors

Best for Bowing walls under soil pressure
Cape conditions Strong against hydrostatic pressure
Typical range $3,000-$20,000+

Underpinning / push piers

Best for Active settlement, dropped footing
Cape conditions Best fix for unstable footings in sand
Typical range $3,000-$20,000+
+
The material matters. The cause matters more.

Whatever repair system you need, the result only holds when the source of water or movement is addressed alongside the crack itself. Grading, downspout extensions, and drainage behind the wall are especially critical on the sandy, high-water-table soils common across South Yarmouth. Pricing shown is a 2026 Cape Cod market estimate and is confirmed after an on-site assessment.

Hiring Guidance

What to Look for When Hiring a Crack and Settlement Repair Contractor on Cape Cod

Close view of a freshly tooled concave mortar joint matched to the surrounding brick
Built to Hold Proper crack prep and port placement decide how long the repair holds.
Diagnosis First

A Site-Specific Diagnosis Before Any Resin Goes In

Every crack repair needs a diagnosis, not a default material. Ask whether the contractor identified the cause of the crack, settlement, hydrostatic pressure, or shrinkage, before selecting epoxy or polyurethane. On Cape Cod, where sandy soil and a high water table are the norm, the cause matters as much as the fix.

Correct Materials

Epoxy for Structural Cracks, Polyurethane for Active Leaks

A contractor who uses one material for every crack is cutting corners. Structural epoxy bonds a static, non-leaking load-bearing crack back to strength. Polyurethane foam stops an active leak because it expands on contact with moisture. Using the wrong one produces the wrong result, and the crack comes back.

Port Spacing

Injection Ports Set Every 8 to 12 Inches and Pressure-Fed to Full Depth

A cosmetic seal that skins the inside face leaves the core of the wall open. Ask whether ports are set every 8 to 12 inches and pressure-fed until resin bleeds through the full wall depth. That bleed-through is how you know the crack is filled front to back, not just tidy looking on the surface.

Source Addressed

The Water Source Addressed, Not Just the Crack Sealed

A sealed crack that still receives water will move again, especially through a Cape Cod winter. Confirm the contractor looks at grading, downspout extensions, and drainage, not only the wall face. Fixing the source is what separates a repair that holds from one that needs repeating after the next freeze cycle.

Our repair process

How we diagnose and repair a cracked or leaking foundation wall

A foundation crack is more than what you see on the inside face. Its cause begins outside the wall, with soil pressure, water movement, and the freeze-thaw cycle that drives both. Getting the repair right means finding that cause before any resin goes in.

Brick joints raked out to depth and cleaned, ready for fresh mortar
What you don't see matters The crack is the symptom. The water source is the problem.

Injection ports, resin pressure, and cure time all happen inside the wall. What holds the repair long-term is addressing grading, drainage, and hydrostatic pressure before the next freeze cycle runs hard on the Cape.

The sequence

Seven stages. One complete foundation repair.

Inspection

Inspect and diagnose

We start on site, measuring crack width and length and tracing the moisture source. Crack type, foundation material, and whether water is actively moving are all identified before anything else happens. About 1 to 2 hours.

Diagnosis

Find the cause

We determine whether the cause is settlement, hydrostatic pressure, or shrinkage, and whether a licensed structural engineer should review it before work begins. Taller or more complex structural repairs may require town review before construction begins. Same visit as the inspection.

Preparation

Clean, prep, and set ports

The crew routes and cleans the crack to sound material, then sets injection ports every 8 to 12 inches. Clean prep is what lets resin bond instead of sitting loose against dust or spalling edges. Half a day for a standard crack.

Injection

Inject the resin

We inject structural epoxy for static, non-leaking cracks or polyurethane foam for active water infiltration, pressure-feeding each port until resin bleeds through the full wall depth. A standard injection repair runs a half-day to one day including cure time.

Stabilization

Stabilize if needed

If the wall is bowing or settling, we install carbon fiber straps, staples, or steel wall anchors at manufacturer spacing to arrest the movement. This stage runs 1 to 3 days depending on the number of anchors required. Underpinning or full perimeter correction runs 1 to 2 weeks.

Source fix

Address the underlying cause

We handle the water that caused the crack: grading correction, downspout extensions, or a drainage recommendation that keeps hydrostatic pressure from rebuilding behind the wall. Skipping this step means the next crack is coming. On Cape Cod's high water table and sandy soil, this stage is what makes the repair hold.

Closeout

Final check and cleanup

We confirm with a moisture meter and visual inspection that no active water is still coming through, then remove ports, finish the surface, and clean up the work area. You get a dry, sound wall and a site left clean.

The Moriah approach We seal the crack and fix what let the water reach it.

Injection resin is eventually covered by parging or paint. Its quality isn't. That's why the prep, the port spacing, and the pressure are never rushed, and why drainage is part of every repair scope that needs it.

Planning your repair

How long does crack and settlement repair take?

Repair time depends mainly on crack type, whether the wall is actively leaking or moving, and how much stabilization is needed. For most South Yarmouth projects, the work falls into one of three ranges.

Hairline or minor crack seal
2-4 hours

Single surface or hairline crack

Dry, non-moving cracks cleaned and sealed same day. No injection ports, no cure wait, no exterior access needed.

Standard injection repair
1-3 days

Epoxy or polyurethane injection

Pressure injection of one or more cracks, including port setting, resin cure time, and carbon fiber or anchor stabilization if the wall is bowing.

Full settlement correction
1-2 weeks

Underpinning or perimeter repair

Active settlement, dropped footings, or full perimeter stabilization with underpinning or push piers, including excavation and drainage work.

A brick wall part way through repointing, with fresh mortar joints beside weathered ones
Build time vs. calendar time Active repair hours are not the same as total project time.

These ranges describe time on site. Permit lead time from the Yarmouth Building Department, weather windows for exterior excavation, and material lead times on anchor systems can all extend the overall calendar.

Cape Cod
seasonal planning
Structural work before summer? Get on the schedule before the spring rush.

Demand for foundation and masonry repair peaks in May and June across South Yarmouth and the surrounding Cape. January and February are the slowest months. Booking ahead of the spring rush gives you more flexibility on timing and lets us get ahead of the next freeze cycle.

Plan your repair

Read your walls

What crack and settlement repair covers, and what it does not

Crack and settlement repair from Moriah Masonry and Landscaping covers diagnostic assessment, crack cleaning and prep, injection materials and labor, port removal and surface finishing, basic drainage recommendations, and cleanup. Structural engineering reports, excavation, and drainage system installs are quoted separately.

A masonry wall corner pulled apart by settlement, with an open vertical gap

Included: diagnostic and prep

Every repair starts with an on-site assessment of crack type, width, depth, and moisture source. The crack is routed and cleaned to sound material before any resin goes in.

Included: injection and finishing

Injection materials and labor, port removal, and surface finishing are all part of the standard scope. You get a sealed, finished wall face with no exposed hardware left behind.

Included: drainage guidance and cleanup

Basic drainage recommendations are included on every job. The site is left clean. Addressing how water reaches the wall is the step that makes the repair last through Cape winters.

Not included: engineer's report

A structural engineer's stamped letter or report is not part of the base scope. When wall bowing, differential settlement, or underpinning is involved, we identify that during the assessment and quote it separately.

Not included: excavation or drainage systems

Exterior excavation for access, interior or exterior drainage system installation, and permit fees are each quoted separately when the scope requires them.

Not included: cosmetic work or mold remediation

Cosmetic wall refinishing, paint, and mold remediation sit outside the standard repair scope. If the assessment turns any of these up, we quote them as a separate line so you see exactly what you are paying for.

Know before you book
Not sure what your repair scope includes?

An on-site assessment lets us walk the wall with you, identify the crack type and moisture source, and give you a clear scope before any work begins.

Schedule an assessment
Built for Cape Cod

How we diagnose and repair a cracked or leaking foundation wall

A stepped crack running through the mortar joints of a block foundation wall

Diagnosing a foundation crack on Cape Cod starts on site, not over the phone. Crack width, length, moisture, and the direction of travel all tell a different story. A horizontal crack signals lateral soil pressure. A stair-step crack in block or brick follows mortar joints under differential settlement. A vertical shrinkage crack may be stable or may be moving. Reading the wall correctly determines which repair goes in.

Once the cause is clear, the fix follows the crack, not a price sheet. Epoxy injection goes into static, non-leaking structural cracks where bond strength is the priority. Polyurethane foam goes into active leaks because it expands on contact with moisture and stops water immediately. Putting the wrong material in the wrong crack produces a repair that fails before the next winter.

Local consideration

Exterior excavation near Bass River or a wetland?

Work within 100 feet of a wetland or 200 feet of a river may require Conservation Office approval before any exterior digging begins. Many South Yarmouth properties sit close to Bass River and other protected resource areas, which can affect how exterior crack or drainage work is scoped. View Yarmouth wetland information

Service Area

Masonry contractor areas we serve across Cape Cod

Foundation repair in South Yarmouth is shaped by water and freeze-thaw. The village sits right on Bass River near Nantucket Sound, so soil here stays wet and the ground freezes and thaws through winter, the cycle that splits masonry and reopens cracks. Moriah Masonry & Landscaping covers this ground because the soil and water problems that crack foundations here are ones we know firsthand.

Communities We Serve
  • Yarmouth
  • Dennis
  • Barnstable
  • Hyannis
  • Brewster
  • Harwich
  • Chatham
  • Orleans
  • Mashpee
  • Sandwich
  • Falmouth
  • Bourne
Our Home Base

Moriah Masonry & Landscaping

24 Commonwealth Ave Ste 2
South Yarmouth, MA 02664

The Moriah approach

Why South Yarmouth homeowners choose Moriah for this work

01

We find the cause before we seal the crack

Ademir Reine's position is simple: when a wall leans or a crack keeps coming back, it's almost never the masonry, it's the water and the base. We diagnose why water reached the wall before we inject, so you're not paying to reseal the same crack next year.

02

Drainage is part of the fix, not an upsell

We install drainage so water has somewhere to go, on the jobs that need it. On the Cape, with its high water table and sandy soil, hydrostatic pressure is what pushes walls in and reopens cracks. Treating the water is how the repair holds.

03

Six years working these exact conditions

We've worked South Yarmouth and the surrounding Cape for six years, on the sandy soil, salt air, and freeze-thaw that take apart work built only to look good on day one. We build for year ten, and we can take you to the jobs that prove it. Learn more about how we work.

04

An owner who walks every site

Ademir Reine, Owner and Founder, learned masonry in Brazil and has more than twenty years in the trade. He has been building and repairing on Cape Cod since 2016 and is the person who walks your property, reads the crack, and tells you straight what it needs.

Brick joints raked out to depth and cleaned, ready for fresh mortar

Every crack repair starts with diagnosing why water reached the wall, not just sealing what is visible on the surface.

Customer Reviews

What South Yarmouth Homeowners Are Saying

Homeowners and property owners across Cape Cod trust Moriah Masonry & Landscaping for foundation crack repair, settlement correction, and leak waterproofing done right. See more feedback on Google .

Highly recommend Moriah Landscaping! Ademir and his team go above and beyond with their hard work, professionalism, timeliness, and quality of work. Ademir's team is pivotal in helping us receive excellent reviews on a new listing: Mariner's Landing. Really appreciate Moriah's care in their work.

Kathy Barthelmes
via Google

Ademir and the Moriah team are excellent in their work. They do a great job with spring/fall cleanup and our winterizing. Professional and always willing to help. Since moving to the cape, they have been so reliable and consistent. I highly recommend using them.

Carl Allien
via Google

5 stars!!!! The whole crew is great. Thanks as always and see you at the next project. BPU

Brian Uhlman
via Google
Common questions

Crack and settlement repair questions from Cape Cod homeowners

What are the warning signs that a foundation crack needs professional repair?

Horizontal cracks, stair-step cracking in block or brick, cracks wider than a credit card, and any crack that admits water during rain all warrant an on-site look. Efflorescence, the white mineral staining on a wall face, signals ongoing moisture movement. Vertical shrinkage cracks that stay dry and stable are lower urgency, but any crack that is growing or leaking needs assessment before the next freeze cycle.

Does a foundation repair job in South Yarmouth require a building permit?

Structural repair in South Yarmouth falls under the Massachusetts State Building Code, and the Yarmouth Building Department issues permits and performs inspections for repair, reconstruction, and alteration of structures. Cosmetic crack sealing rarely triggers a permit requirement, while carbon fiber reinforcement, wall anchors, or underpinning on a load-bearing foundation typically does. We determine permit requirements during the on-site assessment.

What does a crack and settlement repair job actually include?

Every repair covers diagnostic assessment, crack cleaning and prep, injection materials and labor, port removal, surface finishing, basic drainage recommendations, and cleanup. Not included in a standard scope: a structural engineer's stamped letter, exterior excavation, interior or exterior drainage system installation, cosmetic wall refinishing or paint, and mold remediation. Each of those is quoted separately if the scope requires it.

Epoxy injection or polyurethane foam: which material goes in your wall?

The answer depends on what the crack is doing. We use structural epoxy, such as SikaDur or Simpson Strong-Tie CIP, on static, non-leaking load-bearing cracks where bond strength is the priority. Hydrophilic or hydrophobic polyurethane foam goes into cracks with active water infiltration because it expands on contact with moisture and stops the leak. Putting epoxy into a wet, moving crack, or foam into a dry structural one, produces the wrong result.

Can a repaired crack reopen, and what prevents that from happening?

A crack sealed without fixing the source of pressure will move again. After injection, we address the underlying driver, whether that is grading directing water toward the wall, missing downspout extensions, or hydrostatic pressure building behind the foundation. Stopping infiltration at the surface while the cause remains is a temporary fix. The repair work carries a 3 years warranty. Contact us to Get a Quote for your property.

How does Cape Cod's climate specifically accelerate foundation cracking compared to inland areas?

Salt air off Nantucket Sound and a hard seasonal freeze-thaw cycle compound each other in ways inland conditions do not. Salt infiltrates pores that freeze-thaw has already opened, and the cycle repeats each winter. South Yarmouth's housing stock is largely mid-century construction, meaning many foundations have absorbed decades of that combined stress and are now at the stage where hairline cracks become structural ones without intervention.

Do I need a structural engineer before crack repair work can begin?

Most injection repairs do not require an engineer's letter before work begins. When wall bowing, differential settlement, or underpinning is involved, a licensed structural engineer's review is often required by the building department and is always the responsible call. That report is not included in the base repair scope and is priced separately. We identify during the assessment whether engineering review applies to your situation.

Which Cape Cod towns does this crack and settlement repair service cover?

We handle crack injection, settlement correction, and foundation waterproofing across South Yarmouth, Barnstable, Hyannis, Yarmouth, Dennis, Brewster, Harwich, Chatham, Falmouth, Mashpee, Sandwich, Bourne, and Orleans. Scheduling and site access determine lead time across the service area. Contact us to Get a Quote for your property.

Start the conversation

Let's plan a repair that holds.

If your foundation wall is cracking, leaking, or showing signs of settlement, the right time to address it is before the next freeze cycle widens what is already there. Every project starts with a free on-site estimate. We will come out, walk the wall with you, and give you a straight number. Every repair we complete comes with a three-year workmanship warranty. Moriah Masonry & Landscaping serves South Yarmouth and Cape Cod, from our shop at 24 Commonwealth Ave Ste 2. Tell us what you are seeing.